Charging the battery – Parkside PSSA 18 A1 User Manual

Page 31

Advertising
background image

GB

31

MT

textiles). Risk of fire due to heating

during charging.

• If the power cable for this

equipment is damaged, it must

be replaced by the manufac-

turer, a customer service agent

of the same or a similarly quali-

fied person in order to prevent

hazards.

• Do not charge non-rechargeable

batteries in the charger. This could

damage the appliance.

Charging the battery

Do not expose the battery to

extreme conditions such as

heat or impact. Risk of injury

from escaping electrolytic so-

lution! After eye/skin contact,

rinse the affected areas with

water or a neutraliser and

consult a doctor.

Charge the battery in a dry

room only. Prior to attach-

ing the charger, check that

the battery’s outer surface is

clean and dry. There is a risk

of injury due to electric shock.

Only use the charger from the pack-

age to charge the battery. Mind not

to charge the appliance for more

than 1 hour at a time. If you do,

the battery and the appliance may

be damaged and longer charging

times would be a waste of energy.

Excessive charging will void the

warranty.

• Charge the battery before the first time

of use. Do not briefly charge the bat-

tery several time in a row.

• If a fully recharged battery lasts for

considerably shorter operating times,

the battery is used up and needs to

be replaced. Only use an OEM spare

battery available from our Customer

Service.

• Always take heed of the applicable

safety instructions as well as the envi-

ronmental protection regulations and

information.

• The warranty excludes all defects

caused by improper handling.

Removing/inserting the

battery

1. To remove the battery (11) from

the appliance, press the release

button (12) on the battery and

pull out the battery.

2. To insert the battery (11), place

it on the guide track and push it

back into the appliance. It will

audibly snap in.

Recharging the battery

Charge the battery (11) when only

the red LED of the charge indicator

(11a) is lit (see “Checking the bat-

tery charge status”).

1. Remove the battery (11) from the

appliance, as necessary.

2. Slide the rechargeable battery

(11) onto the charger (14). It

locks into place audibly.

3. Plug the battery charger (14) into

a mains outlet.

4. When the battery is fully re-

charged unplug the battery charg-

er (14) from the mains.

Advertising