Eiki LC-SXIU - Manual (Page 24)

This remote control unit is not only able to operate the projector but also usable as a wireless mouse for a PC. One
pointing pad and two click buttons are used for wireless
mouse operation.
Wireless mouse is usable when PC mouse pointer is displayed on the screen. When the menu or indicator of the
projector is displayed on the screen instead of the PC mouse
pointer, the wireless mouse cannot be used.
NOTE: To use the unit as a PC wireless mouse, connect the
projector to the
PC with the attached cable. Signals from the projector
are transmitted to the PC, enabling the remote control
unit of the projector to be used as a PC wireless
mouse. (Refer to CONNECTING THE PROJECTOR in
pages 14 to 19 for the connection.)
LASER POINTER button
This remote control emits a laser beam light as the Laser
Pointer from the Laser Light Window.
When the LASER POINTER button is pressed, laser light goes
on: when the button is released, light goes off.
Laser light is emitted with the RED light which tells the laser
beam being emitted.
The laser emitted is a class I~ laser; therefore, do not look into
the laser light window or shine the laser beam on yourself or
other people. The three marks to the right are the caution
labels for the laser beam.
CAUTION-use of controls or adjustments or performance of
procedures other than those specified herein may result
hazardous radiation exposure.
WIRELESS REMOTE CONTROL UNIT