Maintenance and cleaning, Service – Parkside PNKP 105 A1 User Manual
Page 10
10 GB
2. Press both glued together work-pieces together immediately after
applying the glue for approx. 30 seconds. The glued area is resili-
ent after approx. 5 minutes.
3. Place the glue gun on its stand leg
4
between gluing.
Switching the device off:
Pull the mains plug from the socket.
Maintenance and Cleaning
The low temperature glue gun is maintenance free.
WARnInG! Unplug the mains plug from the socket before
cleaning.
Always keep the device clean, dry and free of oil or grease.
Do not allow liquids to enter the equipment. Please use a soft cloth
for cleaning the housing. Never use petrol, solvents or cleaning
agents that attack plastic.
Service
Have your appliance repaired by qua-
lified specialist personnel using oeM parts only. This will
maintain the safety of the device.
If the plug or mains lead needs to be
replaced, always have the replacement carried out by
the manufacturer or its service centre. This will maintain
the safety of the device.
Service / Warranty
Start-up / Maintenance and Cleaning / Service