Curtis LCD3957UK - Manual (Page 9)

When you initially turn on the TV you will see the first time installation menu as below:
Ensure that the aerial is plugged into the TV,
Make sure your Remote is in TV mode (by
pressing button), switch on the TV by
pressing POWER. You will see the first time
installation menu.
Press the OK button on the remote control to
start the tuning procedure. This process will
find all available ATV and DTV channels and
store them.
By pressing the Quick Start button the first
time installation can be recalled at any time.
Auto installation setup
Auto installation setup
7
Power On / Off the TV
Press the POWER button on the LCD TV or the POWER button on the remote control, the standby
indicator will light green.
To turn off the LCD TV
Press the POWER button on the LCD TV or the POWER button on the remote control, the standby
indicator will light red.
Press the OK button to select your Target region settings.
If you have more than one broadcasting signal in your area, select
the area signal of your choice using the buttons and confirming
with OK.