Please save these instructions – Curtis C1922 User Manual

Page 2

Advertising
background image



COUNTDOWN TIME SETTING

At the state of time, press “M” for four times, then press “S” for 3 seconds into the count-down time setting state. Press “S” to set the

countdown time, minute, second, on or pause by turn. Press “▲” or “▼” to adjust the blinking part. The “TIMER” is blinking; the

countdown time function is on. If no blinking of the “TIMER”, then the countdown time function is paused. When the countdown

time, press “▲” to return the former set time. Press “▼” the former set time will reach zero. (The max for countdown time is 180

minutes and 59seconds; the min is 1 minute) You will be reminded when the countdown time reaches zero. The regular sound is

“BEEP” and the alarm time is 60 seconds, blinking the symbol of the countdown time, the alarm is end and the symbol is

disappearing.

TEMPERATURE INQUIRY

At the state of time, press “M” one time into temperature display state and the temperature inquiry will be ok. Press “S” for ℃&℉

selection.

SOUND ENJOYMENT

At the normal display state, press “▲” or “▼” to enjoy 8 groups of world famous music.

COLOR-LIGHT ENJOYMENT

When the color light switch is placed the position of “TR”, any key operation, inquiry, alarm can control the change of seven-color

light. When at the position of “ON”, the seven-color light will be changeable little by little. When at the position of “OFF” the color

light will be off.

DISPLAY CONTROL

When the “BACK TO TIME SWITCH” is placed at the position of “ON”, at any state and no any operation in 10 seconds, it displays

time automatically, and when the switch is at the position of “OFF” the display will keep the last state all the time.

ATTENTION

1. If there are any phenomena of low alarm sound, paucity, blurry time display no color light or dark light, please replace new

batteries.
2. The color light is for short time enjoyment, not turn on the color light for long time

3. At any abnormal phenomenon, please press, “RESET” to turn it on again.

4. Re-set the time and alarm after batteries replaced.
5. At any abnormal state, please get professional help or contact our company.




PLEASE SAVE THESE INSTRUCTIONS





































Advertising