Envision Peripherals L32W661 User Manual
Page 14
13
TO USE THE MENUS
1. Press
the
MENU button to display the main menu
2. Use
the
cursor up/down to select a menu item.
3. Use
the
cursor left/right to enter a submenu.
4. Press
the
OK button to enable/disable the function.
5. Press the MENU or EXIT button to exit the menu.
Press the MENU button to enter the main OSD (On Screen Display). Adjust the
items including Setup menu, Video menu, Audio menu and Feature menu.
However, some function items in the menus may only be enabled in the particular
source modes.
SETUP MENU
The Setup menu in TV mode shows as below. In others source modes, the Setup
menu only shows Menu Language and Aspect Ratio items.
1. Tuning Band: Select TV source signal from the Air (antenna) or Cable (CATV).
2. DTV Signal: Show the intensity of the received DTV signal.
3. Auto Ch Search: Automatically scan all NTSC / ATSC TV channels and
then store in the channel table. In channel scan process, the OSD can
display the number of channels which had been found.
English
NTSC