Curtis RCD817 - Manual (Page 9)

Listening to CD
REPEAT
8
To repeat a single or the entire disc.
Press the REPEAT button once. The
Repeat indicator flashes. Press the
F.R or F.F buttons to select the desired
track, then press the PLAY/PAUSE
button to begin repeat Playback of the
selected track.
F
Flash
Press the REPEAT button twice. The
repeat indicator remains 'on' . Press
the PLAY/PAUSE button to begin
repeat Playback of the entire disc.
To cancel Repeat Playback press the REPEAT
button until the Repeat Indicator goes 'off ' .
Repeat Playback is also cancelled by pressing
the STOP button, or setting the Function selector
to the AM , FM or PHONO position.
PROGRAM
Programmed playback. E
This feature allows you to program up to 32
tracks on a disc for playback in any desired
order.
Note: You cannot program tracks while a disc
is playing. If the disc is playing press the STOP
button first before beginning the programming
steps below:
1.) Press the PROGRAM button to enter the
Program Mode. The Program number briefly
shows '0 1', then the Program indicator flash.
Flash
2.) Press the F.R or F.F buttons to select the first
track number you wish to enter in the program
memory, the track number will flash.
Example: Track Number '0 8'.
Flash
3.) When the desired track number appears
on the display, press the PROGRAM button
again to enter that track in memory. The
Program number will shows '0 2'.
4.) Repeat Steps 2-3, selecting a different track
number each time until you have entered up to
32 tracks in the program memory.
Note: You may program the same track number
to play multiple times in the program sequence
if desired.
5.) Press the PLAY/PAUSE button to begin
Programmed playback. The Program indicator
stops flashing and remains 'on'. Playback will
begin with the first track you programmed and
will continue until the last programmed track
has played.
6.) After the last track has played the player
stops and the display shows the total number
of tracks on the disc. However the program
sequence remains in the memory.
The programmed sequence may be cancelled by,
Pressing the open button, STOP button, switching to
the AM, FM or PHONO or shutting the system 'off '.
When Programmed Playback begins press the
REPEAT button twice to activate the all tracks
repeat feature.
Program Repeat Playback
The Repeat Indicator lights and all the tracks in
your programmed sequence will be repeated
continuously.
To cancel Programmed Repeat Playback press the
STOP button until both the Program and Repeat
Indicators go 'off '.
G
Random Playback. H
RANDOM
In playing or STOP mode, press the RANDOM
button, a cycle mark will be showed, when the
display shows a random tack number, playback
will begin automatically.
To cancel Random Playback press the STOP button.