Curtis RCD820 - Manual (Page 4)

Listening to Compact Disc
Compact Disc
Handing the Discs :
This unit has been designed specifically for sound
reproduction f om compact discs bearing the mark .
No other discs can be used .
Always place the compact disc in the disc tray with
label facing upward . (Compact discs can be
on one side) .
To remove a disc from its storage case , press down
center of the case and lift the disc out , hold
by the edge .
r
the
player only
on the
ing it carefully
HANDLE DISC ONLY AS SHOWN
Fingermarks and dust should be carefully wiped off
the disc recorded surface with a soft cloth (not included) .
Never use chemicals such as : record sprays ,
sprays or fluid , benzine or thinner to
Such chemicals will do
plastic surface .
Discs should be returned to their cases after use
serious scratches that could cause the laser pickup to skip .
Do not expose discs to direct sunlight or high
temperature for extended periods .
Long exposure to high temperature can warp the disc .
Do not stick paper or write anything with a ball
the surface of the label side .
Do not use irregular shaped CD`s (octagonal ,
etc .) ,all of which can damage the unit .
CLEAN FROM CENTER TO EDGE
anti- static
clean compact discs .
irreparable damage to the disc`s
to avoid
humidity and
point pen on
heart-shape,
3
Preparation of Use
Loosen the screw used for transportation by turning it
clockwise with a coin .
AC CONNECTION
Plug the power cord into an AC outlet having 120v,60Hz
only. Connecting this unit to other power
sources may damage the unit.
NOTES:
*The AC polarized to help
minimize the possibility
of electric shock. If the polarized plug does not
fit into a nonpolarized AC outlet, do not file or cut the
wide blade; it is the user`s responsibility to have an
electrician replace the obsolete outlet.
*The power cord should be unplugged from the outlet
when the unit is not going to be used for a long period
of time.