Curtis CDMP364 - Manual (Page 5)

BEFORE PLAYBACK
HOLD switch
Turn on and off
Standby mode
Release the HOLD switch to OFF position
before playback.When not using the unit, set
the HOLD switch to the ON position,
Accidentally pressed button will not function,
If buttons are pressed when the HOLD switch
is set to the ON position. "HOLD" light on the
display.
Turn the power on
Press PLAY/PAUSE. Power is turned on
and playback starts.
Turning off the power
If no new operations are done within 60
second from the end of last operation, the
power is turned off automatically.(Auto
power off function) you can turn off the
power before it is automatically turned off by
pressing STOP
When an operation finishes, the unit goes into
standby mode until the auto power off function
automatically turns off the power.
To enter standby mode, press PLAY/PAUSE
to start playback, then press STOP
Adjusting the sound
Volume
BASS BOOST
Turn The VOLUME control to adjust the
volume.
Switch on the BASS BOOST for extra bass
emphasized.
D
HOLD
ON OFF
E
BASS
ON OFF
D
D
D
E
E
4