Emerson EM6000 - Manual (Page 8)

Connecting
1. Plug one end of the line cord into the jack at the back of the phone’s base,
and the other end into a modular phone jack.
2. Connect the AC adaptor as shown above, and plug into a standard
AC outlet.
3. The handset will display “Searching”, wait until “Handset 1” is displayed.
4. Press on the handset and confirm you hear the dial tone.
Wall Mounting
To mount your telephone on a wall plate (not included), follow the
instructions below:
1. Plug the line cord into a modular phone jack.
2. Align the holes on the base with the mounting studs on the wall plate.
3. Pull the base down onto the studs until the telephone is secure.
1. Press the button to enter the menu.
2. use the ▲ and ▼ buttons to navigate from the
following selections: Phonebook, Handset, Base
Settings, Time, and Tools.
3. Press the softkey to select an option.
4. Press the softkey to go back.
Phonebook
Handset
Base Settings
Time
menu screen
spk
Soft Keys
Menu
Use the menu to customize various settings such as ringer volume, ring
tones, language, display settings and more.