Important safety instructions, General safety, During use – Electrolux 2222 784-01 User Manual

Page 2: Maintenance and cleaning, Prior to installation, Installation, Refrigerant, Child safety

Advertising
background image

2

General Safety

This appliance contains hydrocarbons in its

cooling unit; maintenance and recharging must
therefore only be carried out by authorised
technicians.

Take utmost care when handling your

appliance so as not to cause any damages to
the cooling unit with consequent possible fluid
leakages.

The appliance must not be located close to

radiators or boilers.

Avoid prolonged exposure of the appliance to

direct sunlight.

Do not use other electrical appliances (such as

ice cream makers) inside of refrigerating
appliances.

During Use

• This appliance is designed for domestic use only,

specifically for the storage of edible foodstuffs. It is
not intended for commercial or industrial use.

• Containers with flammable gases or liquids can

leak at low temperatures. Do not store any
containers with flammable materials, such as spray
cans, fire extinguisher refill cartridges etc. in the
freezer.

• Frozen food should not be refrozen once it has

thawed out.

• Do not place carbonated or fizzy drinks in the

freezer compartment.

• Ice lollies can cause ‘frost/freezer burns’ if

consumed straight from the freezer.

• Do not remove items from the freezer compartment

if your hands are damp/wet, as this could cause
skin abrasions or frost/freezer burns.

• Bottles and cans must not be placed in the freezer

as they can burst when the contents freeze.

• Manufacturers’ recommended storage times should

be adhered to. Refer to relevant instructions.

Maintenance and Cleaning

• Before cleaning, always switch off the appliance

and disconnect from the electrical supply.

• When unplugging always pull the plug from the

mains socket, do not pull on the cable.

Prior to Installation

• Check the appliance for transport damage. Under

no circumstance should a damaged appliance be
installed. In the event of damage please contact
your retailer.

Installation

• This appliance is heavy. Care should be taken

when moving it.

• It is dangerous to alter the specifications or attempt

to modify this product in any way.

• Ensure that the appliance does not stand on the

electrical supply cable. Important: if the supply
cable is damaged, it must be replaced by
authorized service or qualified personnel using a
special cable of the same type.

• Any electrical work required to install this appliance

should be carried out by a qualified electrician or
competent person.

• Parts which heat up should not be exposed.

Whenever possible, the back of the appliance
should be close to a wall, but leaving the required
distance for ventilation, as stated in the installation
instructions.

• The appliance should be left for 2 hours after

installation before it is turned on, in order to allow
the refrigerant to settle.

Refrigerant

• The refrigerant isobutane (R600a) is contained

within the refrigerant circuit of the appliance, a
natural gas with a high level of environmental
compatibility, which is nevertheless flammable.

• During transportation and installation of the

appliance, be certain that none of the components
of the refrigerant circuit become damaged.

• If the refrigerant circuit should become damaged:

- avoid open flames and sources of ignition.
- thoroughly ventilate the room in which the

appliance is situated.

Child Safety

• Do not allow children to tamper with the controls or

play with the product.

• There is a risk of suffocation! Keep packaging

material away from children!

Important Safety Instructions

These warnings are provided in the interests of your safety. Ensure that you understand them all
before installing or using this appliance. Your safety is of paramount importance. If you are unsure
about any of the meanings of these warnings contact the Customer Care Department.

Advertising