Elite Screens 022111AS - Manual (Page 2)

2
Rev.022111‐AS
www.elitescreens.com [email protected]
Please make sure all parts listed below are included before proceeding with the installation.
a. b. c.
Caution Notes:
1. This product is an adhesive rear‐projection screen that can be applied to various surfaces such
as transparent glass or acrylic.
2. This product is made for one‐time permanent application. It has a non‐reusable adhesive film
that bonds firmly to a window surface. If the surface has any layer treatment such as tinting, it is
likely that the layering will be damaged upon removal of the material.
3. To ensure an even and “bubble –free” installation. Make sure that the window surface is clean
and evenly moistened previous to the installation.
4. Do not fold the Insta‐RP material. Folding will result in a permanent crease that cannot be
removed.
5. Avoid touching the material with any hard or sharp objects that may cut scratch or otherwise
deface the screen.
6. The Insta‐RP material is applied to a moist surface. This can impact the installation of the
material by possibly creating slight ripples or bubbles. These will disappear within the first few
weeks as the micro‐droplets of water trapped in the adhesive evaporate.
Parts List QTY
a. Insta-RP Screen Material 1
b. Microfiber cleaning cloth 1
c. Scraper 1
Parts List for Insta-RP Series