Curtis SKCR2713 - Manual (Page 7)

Radio Reception
An FM antenna is built into the unit. To improve FM radio reception, adjust the position of the
unit.
Tuning the FM Radio
1. Press the Power button to turn the under cabinet music system on.
2. Press the Source button to switch to FM Radio Mode.
3. Press the Tune +/- button to tune the radio manually.
4. Hold down the Tune +/- button to scan for available stations.
Saving and Playing a Station as a Preset
1. Tune to the desired station.
2. Press the Clk set/Mem button. Preset number will appear on the display.
3. Press the M +/- buttons to adjust to the desired preset number.
4. Press the Clk set/Mem button to save the current radio station to the selected preset.
5. Press the M +/- buttons to cycle through preset radio stations.
Pairing a Bluetooth Device for the First Time
1. Power on the unit by pressing the Power button.
2. Press the Source button to switch to Bluetooth mode. The Pairing Indicator will flash slowly.
3. Press the Pair button. The Pairing Indicator will flash quickly. When pairing, remain within 3
feet of the unit.
4. Using the native controls on your Bluetooth device, select the SKCR2713 in your Bluetooth
settings to pair.
5. If your device requests a password, enter the default password 0 0 0 0 .
6. Refer to the user’s manual for your specific device for instructions on pairing and connecting
Bluetooth devices.
7. When successfully paired and connected, the Pairing Indicator will be solid.
8. After initial pairing, the unit will stay paired unless unpaired manually by the user or erased
due to a reset of the device.
9. If your device should become unpaired or you find it is unable to connect, repeat the above
steps or press the Pair button to start the pairing process pairing again.
RADIO
BLUETOOTH AND LINE IN
7