Curtis TCR4964 - Manual (Page 11)

TO SHUT THE ALARM OFF
Press the STANDBY/ON button to stop the Alarm ring
immediately.
Press the SNOOZE button, the SNOOZE indicator will
light. The Alarm ring will be stopped temporarily and it
should be continue ringing after 6mins.
m
m
TO ACTIVATE THE SLEEP FUNCTION
Your CD micro system can be set to switch off automatically
afer a preset period of between 15 and 90 minutes.
m While the unit is on , press the SLEEP button on the unit
the display will show 90 and SLEEP Indicator lights on.
m Successive pressing of the SLEEP button reduces the
time by 90/60/30/15 with each press. For example if you
want the system to switch off in 30 minutes press the
SLEEP button three times.
m Afer approximately five seconds the sleep function is
registered. The display reverts to its previous state,
SLEEP stops flashing and remains on .
Note: You have approximately five seconds between
successive pressing of the SLEEP button before the sleep
function is registered.
m To remove the sleep setting press the SLEEP button again.
SLEEP will be removed from the display.
HEADPHONE
Headphones should have a 3.5mm diameter stereo plug and
an impedance of 8-32 ohms.When headphones are connected,
the speakers are automatically disconnected.
10