Curtis SRCD3815 User Manual

Page 5

Advertising
background image

The appliance is designed for mains operation with an alternating voltage of 120V~60Hz.

Never attempt to operate the appliance with a deviating power supply. Otherwise the

appliance will be damaged and there is a risk of safety.

MAINS (AC) OPERATION

Connect the supplied cable to a fully installed 120V ~ 60Hz protective contact scoket and

to the cable socket on the back of the device. The appliance is now ready for use.

CAUTION

To prevent electric shock disconnect from the mains before removing cover. No user

serviceable parts inside. Refer servicing to qualified service personnel.

OPERATION

To turn on the radio, set the OFF/AM/FM Switch to either AM or FM. The back light of

frequency scale on the display will light up.

For FM reception, pull out the telescopic antenna as far as possible and direct it for

possible reception.

For AM reception, transmitters an internal ferrite antenna is built into the appliance.

Position the appliance for a good reception.

Adjust the station selector TUNING to the intended station.

Adjust the Volume Control to the intended sound.

To turn off the radio, set the OFF/AM/FM Switch to OFF. The back light of frequency scale

on the display will extinguish.

CARE

Protect the appliance from strong temperature variations and excess dust. If necessary,

wipe it off with a dry cloth.

B E F O R E U S E

- 4-

Advertising