Emerson EWL3706 - Manual (Page 14)

14
EN
CHANNEL LIST
This function lets you remove undesired channels
from the Channel Registration List.
1
Display the setup screen.
• Press [SETUP].
The following setup screen appears.
2
Select “CHANNEL” and press [ENTER] to con-
firm.
• Using [K /L], select “Channel List”.
• Press [ENTER].
Channel Channel
Autoscan
Channel List
Manual Register
Antenna
ENTER
STILL
SETUP
BACK
SCREEN
MODE
INFO
CH RETURN
MUTE VOL. CH
- 0
ENTER
SETUP
3
Select the channel you want to remove.
• Using [K/L], select the channel.
• Press [ENTER] to highlight the channel select-
ed for removal. You will not be able to select the
channel again using [CH K/L].
• To reactivate the removed channel, highlight it
and press [ENTER].
• When you remove a major channel, you
remove its minor channels, too.
4 To exit the setup, press [SETUP].
NOTE:
• The channel with “DTV” indicated on the display is ATSC,
otherwise the channel is NTSC.
Channel List Channel List
DTV 8 DTV 8
DTV 6 DTV 6
9 9
DTV 48 DTV 48
58 58
27
DTV 67
Ch Select Watch/Skip Back BACK
ENTER
Highlight channels for
Ch Up/Down key selection.