Auriol Z31092 - Manual (Page 9)

9 GB
If you cannot find your country in the table,
please orient yourself to the local time zone.
Using the 12 / 24 hour display
Press the / 12 / 24 button 14 to switch
between the 12 and 24 hour time formats.
Note: The AM symbol in the time display 17
stands for before noon in the 12 hour format.
The PM symbol in the time display
17 stands
for after noon in the 12 hour format.
Setting the alarm time
Note: You can set two different alarms separately.
Press the MODE button 15 to select either
Alarm 1 13 or Alarm 2 13 . The
currently set alarm time and the selected
alarm symbol
13 , 13 appear in
the time display 17 .
Press and hold down the MODE button 15
for about 3 seconds. The hour value
flashes. Press the / button
11 or the
/ 12 / 24 button 14 to set it to the desired
value.
Tip: By keeping the / button 11 or the
/ 12 / 24 button 14 pressed, you acceler-
ate the process and reach the desired value
more quickly. This quicker method can also
be used for making the other settings. If dur-
ing a period of 30 seconds no buttons are
pressed, the LC display returns automatically
to the default display.
Press the MODE button 15 . The minute value
flashes. Press the / button 11 or the
/ 12 / 24 button 14 to set it to the desired
value.
Confirm your settings by pressing the MODE
button
15 .
Activating / deactivating the
alarm function
Press the MODE button 15 to access the
activate or deactivate the alarm mode.
Press the ALARM button 10 to activate the
alarm function. The Alarm symbol 13 appears
in the LC display.
Press the ALARM button 10 again to deacti-
vate the alarm function. The Alarm symbol 13
disappears from the LC display.
The alarm will sound when it reach to the set
time. Press the MODE button
15 , the /
button 11 , the / 12 / 24 button 14 or the
SNOOZE / LIGHT button 12 to switch off
the alarm signal. Otherwise the alarm signal
sounds for about 2 minutes then stops auto-
matically.
Press the SNOOZE / LIGHT button 12 , to
switch off the alarm. The alarm automatically
switches back on after 5 minutes.
When you press the / button 11 or the
/ 12 / 24 button 14 , the alarm switches
off and only switches on again on the next
day in the previously set time.
Displaying the sun and moon
rising / setting times
Note: The calculated times of setting and rising
of the sun and moon are intended for orientation
only. You should contact your local weather fore-
casting service for the exact times.
Note: After you have completed all the settings
(see”setting the date / language / clock / time
zone), the weather station calculates the rising and
setting times of the sun and moon. The setting /
rising time of the sun or moon flashes during this
operation.
Press the SUN / MOON button 31 to display
the calculated sunshine hours of the selected
day.
To check the setting / rising time for other
location & date, press and hold down the
SUN / MOON button
31 for about 3 sec-
onds to access the setting / rising time of the
sun or moon quick control mode. The loca-
tion
8 flashes.
Set the country, city, year, month and the
day for which you wish the information to be
displayed by pressing the SUN / MOON
button
31 or the / button 11 or the
/ 12 / 24 button 14 .
Press the SUN / MOON button 31 to con-
firm your settings.
Note: The sun and moon setting or rising
time flashes while the values are being
calculated.
Note: If the next moon rising or setting is
on the following day, the display shows
MOONRISE+1 or MOONSET+1.
Moon phases
The following moon phases are shown by the
moon phase symbol
6 :
New moon Waxing half-
moon Half-moon Waxing full
moon
Full moon Waning full
moon Half-moon Waning half-
moon
Preparing to use the weather
forecasting function
Note: Please take the weather forecast from
your local weather forecasting service into account
as well as the forecast from your weather station.
If there are discrepancies between the information