Disclaimer and warning, Introduction, Assembling the propellers – DJI Mavic Propeller Cage User Manual

Page 4

Advertising
background image

2

©

2017  DJI All Rights Reserved.

EN

Disclaimer and Warning

Congratulations on purchasing your new DJI™ product. The information in this document affects your safety and your legal rights and

responsibilities. Read this entire document carefully to ensure proper configuration before use. Failure to read and follow instructions and

warnings in this document may result in serious injury to yourself or others, damage to your DJI product, or damage to other objects in

the vicinity. This document and all other collateral documents are subject to change at the sole discretion of DJI. For up-to-date product

information, please visit www.dji.com.
By using this product, you hereby signify that you have read this disclaimer and warning carefully and that you understand and agree to

abide by the terms and conditions herein. You agree that you are solely responsible for your own conduct while using this product, and for

any consequences thereof. You agree to use this product only for purposes that are propeller and in accordance with all applicable laws,

rules, and regulations, and all terms, precautions, practices, policies and guidelines DJI has made and may make available.
DJI accepts no liability for damage, injury or any legal responsibility incurred directly or indirectly from the use of this product. Users shall

observe safe and lawful practices including, but not limited to, those set forth in the document.
DJI is a trademark of SZ DJI TECHNOLOGY CO., LTD. (abbreviated as “DJI”) and its affiliated companies. Names of products, brands,

etc., appearing in this manual are trademarks or registered trademarks of their respective owner companies.

Introduction

The MAVIC

TM

Propeller Cage is used to effectively protect people and objects from spinning 7728 Quick-Release Folding Propellers.

In the Box

Ensure to unfold the frame arms before mounting the propeller cages. DO NOT fold the frame arms with the cages on.

Always confirm propeller cages are mounted in the Main Controller Settings->Advanced Settings of the DJI GO™ 4 app after

installation.

DO NOT touch the spinning propellers even with the propeller cages on.

Please use DJI 7728 Quick-Release Folding Propellers with the propeller cages.

Propeller cages may be damaged through impact if flight speeds exceed 2.68mph (1.2m/s). Tripod Mode is recommended

when propeller cages are in use.

Assembling the Propellers

Install the propeller cage by following the steps below.

1. Open the lock underneath the propeller cage. Attach the propeller cage marked with a 1 onto the right front frame arm. Make sure that

the motor on the frame arm is fully contained.

Securing Lock × 2

7728 Quick-Release Folding Propeller Pair × 3

Propeller Cage × 4

Advertising