Language, Water level probes, Water level probe – Everpure 2001 User Manual
Page 27: Set water level, Suprema 2001 - operation & service manual
SUPREMA 2001 - OPERATION & SERVICE MANUAL
Suprema 2001 - Operation & Service
July 6, 2001
Page 27 of 60
SETTING LANGUAGE
The messages that appear on the LCD can be displayed in either English or French.
Please note that the coffee maker will be shipped from the factory with the messages
set to English.
1. To set the language, press the "
UP
" button on the hidden menu scroll
buttons and scroll until the following message appears,
a) Press the "
START
" button to enter the set mode.
b) Using the hidden setting adjustment buttons, select “
ENGLISH
”, or
“
FRENCH
”, or “
ENGLISH
+
FRENCH
”.
c) To save, press either one of the two hidden menu scroll buttons.
SETTING THE WATER LEVEL PROBE
When scrolling through the "
SET
-
UP
" mode, you will notice a setting in the menu that
reads,
1. Press "
START
" to access this menu.
a) Using the hidden adjustment buttons, change the setting from
"
MECHANICAL SWITCH
" to "
ELECTRONIC PROBE
".
b) Exit the “
SET
-
UP
” mode.
WARNING:
Do not access this menu if the machine is not equipped with the electronic
water level probes.
SET LANGUAGE
PRESS <START>
SET WATER LEVEL
PRESS <START>
!
Note:
If “
ENGLISH
+
FRENCH
” is
selected, the
messages on the
display will
continuously
toggle from
English to French
approximately
every three
seconds.