Earthquake Sound IQUAKE IQ-52W - Manual (Page 7)

IQ-52 Amplifier Features
Ÿ Input Mode: iPod®, RCA, AUX mode select button.
Ÿ USB: To sync your iPod® with your computer.
Ÿ S-Video: A standard 4-pin S-Video cable connector.
Ÿ RCA Input: Used to connect signals from unbalance, -10dBv devices. The white
connector is for the Left input and the red connector is for the Right input.
Ÿ AUX Input: For maximum flexibility, we have included a stereo “Aux in” input allowing
a secondary audio source (such as your portable music player, computer, etc.).
Ÿ Volume control: Use the volume control to set the output sound pressure from the IQ-
52 system to proper levels as required.
Ÿ Vent Port: This port extends the reproduction of very low frequencies.
Ÿ 1/4” TS Output: Use 3 meter, speaker cable included in the IQ-52 package to connect
the left and right speakers via the 1/4” TS jacks on the back of each speaker.
Ÿ Power Switch: This Switch turns the device on and off, The on position is indicated
with the marking “•”
(a white dot).
Ÿ Power Receptacle with Fuse Holder: Accepts a detachable 3-circuit line cord in
order to power the device. Holds the external main fuse; 110V = 2A, 220V=1A.
Ÿ Aux AC Output: Power outlet for AirPort Express® or wireless repeater devices.
Ÿ SUB Out: Supply signal below 80Hz Low Frequency for subwoofer.
Rear Panel Features
Specifications are Subject To Change Without Notice 7