Extron electronic PA 300s - Manual

www.extron.com
Distribution Amplifiers
n 350 MHz (-3 dB) RGB bandwidth
n Drives 1600x1200 UXGA resolution
signals up to 1,000 feet (300 meters)
n Continuously variable controls
for gain, low frequency and high
frequency peaking
n Restores sync to TTL level
n
HDTV tri-level sync compatibility
n Rack-mountable metal enclosure
n
Internal international power supply
PA 300
Peaking amPlifier for rgBHV
The Extron PA 300 is a peaking amplifier capable of driving 1600x1200 UXGA
resolution signals up to 600 feet (185 meters) when used with Extron MHR or similar
cable, and up to 1,000 feet (300 meters) when used with higher performance
coaxial cable such as Extron RG6. It is ideal for a wide range of applications in
lecture halls, conference rooms, auditoriums, command and control centers, and
other installations where signal integrity must be maintained over long cable runs.