Useful information part 4, Specifications, Troubleshooting – Casio 130CR User Manual
Page 38
38
E
2.
Specifications
INPUT METHOD
Entry:
10-key system; Buffer memory 8 keys (2-key roll over)
Display (LED):
Amount 8 digits (zero suppression); Department/PLU No.; No. of repeats
PRINTER
Receipt:
12 digits (Amount 10 digits, Symbol 2 digits)
(or journal)
Automatic paper roll winding (journal)
Paper roll:
58 mm
×
80 mm
∅
(Max.)
CALCULATIONS
Entry 8 digits; Registration 7 digits; Total 8 digits
CALCULATOR FUNCTION
8 digits; Arithmetic calculations; Percent calculations
Memory protection batteries:
The effective service life of the memory protection batteries (3 UM-3, R6P (SUM-3) or LR6 (AM-3) type batteries) is
approximately one year from installation into the machine.
Power source/Power consumption: See the rating plate.
Operating temperature:
0°C to 40°C (32°F to 104°F)
Humidity:
10 to 90%
Dimensions/Weight:
203 mm(H)
×
330 mm(W)
×
360 mm(D) with S drawer
4.1 kg with S drawer
250 mm(H)
×
410 mm(W)
×
450 mm(D) with M drawer
9 kg with M drawer
Specifications and design are subject to change without notice.
1.
Troubleshooting
USEFUL INFORMATION
Part 4
Symptom/Problem
Most common causes
Solutions
1
E01 appears on the display.
2
E94 appears on the display.
3
No date or time on receipt.
Paper is not advancing enough.
4
Drawer opens up after ringing up only one
time.
5
Not clearing totals at end of day after taking
report.
6
Programming is lost whenever register is
unplugged or there is a power outage.
7
Register is inoperative.
Can’t get money out of drawer.
Changing modes without completing transaction.
Printer paper is jammed.
Printer is programmed as a journal.
Department is programmed as a single item dept.
Using X mode to take out reports.
Bad or no batteries.
No power.
Return mode switch to where it stops
buzzing and press
p
.
Remove jammed paper. Turn Mode
switch to OFF then turn to ON, or Turn
power OFF and then turn power ON.
Program printer to print receipts.
Program the dept. as a normal dept.
Use Z mode to take out reports.
Put in new batteries.
Pull lever underneath register at rear.