Specifi cations – Casio DT-970 User Manual

Page 37

Advertising
background image

E-35

Important!

Always make sure to fi rst remove the 970 from the Ethernet Cradle when

switching the selector switch.
Water or other liquids on the data communication or power supply terminals can

lead to an electric shock or fi re. Note also that soiling on the terminals will impair

the connection, leading to reduced power supply and communication functionality.

As a safety precaution, disconnect the AC adapter before wiping the data

communication and power supply terminals clean with a dry cloth or cotton bud.
Never short out the power contacts of the Ethernet Cradle. This can damage the

Ethernet Cradle.
Do not subject the Handheld Terminal and Ethernet Cradle to vibration or

impact during communication. This can cause communication to be interrupted.
When loading the DT-970, fi t it securely in place and check that the green power

indicator LED on the front of the Ethernet Cradle is lit.

The DT-970 must be inserted correctly to draw power and communicate

successfully.
Always cap ports that are not being used. Using the Ethernet Cradle while the

ports are uncapped can cause damage.
Do not pick up the DT-970 while it is mounted in the Ethernet Cradle. Doing so

may result in the Ethernet Cradle being accidentally dropped, causing injury or

damage.
If the Ethernet Cradle will not be used for an extended period, set the power

switch to OFF.

Specifi cations

1. LAN Specifi cations

Communications protocol: IEEE 802.3
Media type:

10base-T/100base-TX auto-switched

2. USB

Protocol:

USB Ver2.0 Full speed

Transmission rate:

12Mbps (max.)

3. Power Supply

Power Source:

AC adaptor (AD-S42120C-N5)

Consumption Current:

12V DC approximately 0.3A

Output to Handheld Terminal: 5V DC 0.5A (max.)
USB Host Output:

5V DC 0.5A (max.)

4. AC Adaptor

Model: AD-S42120C-N5
Input:

100V to 240V AC 50/60Hz 1.2A

Output:

12V DC 3.5A

5. Dimensions and Weight

Dimensions:

Approximately 94(W)

× 84(D) × 107(H) mm

Weight: Approximately

280g

6. Operating Environment

Temperature:

0°C to 40°C (32°F to 104°F)

Humidity:

30% to 80% RH (non-condensation)

Advertising