Nikon KeyMission 170 - Manual (Page 101)

82
Using the Menu
The Camera Settings Menu
Re-pairing
Re-pair when pairing the same smart device again after unpairing using End pairing
in the SnapBridge 360/170 app.
Android Devices with NFC Support
1
Select Connect to device in the
network menu and press the
k button,
and then press
H or I to select
Options and press the
k button when
the dialog shown on the right is
displayed.
• An NFC confirmation dialog is displayed.
2
After checking that NFC is enabled on
the smart device, touch the camera
Y
(N-Mark) to the NFC antenna on the
smart device.
• Launch the SnapBridge 360/170 app. When the
confirmation dialog for connecting is displayed,
tap OK.
• If the SnapBridge 360/170 download site is
displayed, download and install the app before repeating the above steps.
3
Follow the instructions on page 12, starting with Step 4.
set SnapBridge later
from the Network menu,
select Later.
Options
Later