Eton A M / F M / S H O R T W A V E R A D I O FR350 User Manual

Page 4

Advertising
background image

USING AN AC ADAPTER

FR350

OPERATION MANUAL

4

1. Open the battery compartment; it slides downward with firm

pressure at center of hinge.

2. Connect the battery pack.

1. Rechargeable battery pack (included).
2. 3 AA batteries (not included).
3. AC adapter/charger (included).
4. Continually turning the crank, even with no batteries installed.

1. Switch the power selector to the OFF position.
2. Turn the dynamo-crank clockwise or counter-clockwise about 2

turns per second.

3. After charging, select the DYNAMO/ADAPTOR position for power.

While charging, the red LED charging light illuminates. Aprox. 60-90
seconds of cracking will give you about 40-60 minutes of radio play
at low volume. Longer cranking will not increase the time of radio
play.

1. Open the battery compartment.
2. Install 3 AA batteries, observing polarity diagram.
3. For power, set the power selector switch to the BATTERY position.

INITIAL SETUP

1. Flip open the socket cover and plug the adapter into the DC 4.5 V socket.
2. For power, set the power selector switch to the DYNAMO/

ADAPTER position.

1. Set power selector switch to DYNAMO/ADAPATOR.
2. While continually turning the dynamo crank, radio stations can

be tuned and the lights and siren function.

Because cell phone batteries vary in their current ratings, we cannot
specify charging rates or usage time. 10 to 15 minutes of cranking
may result in 1 or more minutes of talk-time.

1. Set power selector switch to OFF position.
2. Flip open the socket cover and plug the cell phone charging cord

into the Phone Charge socket.

3. Select the correct charging tip for your phone.
4. Plug charging tip into the charging cord and into the phone’s

charging socket.

5. Rotate the dynamo crank.

Turn it on with the POWER switch.
1. Select the BATTERY position when using AA batteries.
2. Select the DYNAMO/ADAPTER position when powering via the

AC adapter or internal, rechargeable Ni-MH battery pack.

3. To turn off, set power selector switch to OFF.

POWER SOURCES

CHARGING THE BATTERY PACK

EMERGENCY OPERATION WITH NO POWER SOURCE

CELL PHONE CRANK CHARGING

AA BATTERY OPERATION

5

TURNING THE RADIO ON AND OFF

Advertising