Formatting data in the viewer – Epson P-7000 User Manual
Page 99
Advertising
Formatting Data in the Viewer
You can delete all of the data from the viewer. Settings in the viewer itself are not deleted.
Note:
Before formatting, be sure to backup important data to an external hard disk or memory device.
1. Connect the AC adapter to the viewer.
2. Turn on the power while holding down the OK and Menu keys simultaneously.
3. Select Yes using the Up or Down key, then press the OK key.
4. Input the four digit password using the Up, Down, and OK keys, then press the OK key to finish.
5. When the format confirmation message appears, select Yes using the Up or Down key, then
press the OK key.
6. When a message appears indicating that formatting is complete, turn off the power.
R41A0K180 User’s Guide
Troubleshooting 99
Advertising