Emerson Process Management D5092 - Manual (Page 24)

Reference Guide
D5092
11-Dec-2007 - Page 24
Alarm Printer View
Remote Automation Solutions
Website: www.EmersonProcess.com/Remote
1.3.5.7.1 Features
1.3.5.7.1.1 Current Workstation Only
If checked, alarms and events will be filtered on whether they originated from the current Workstation.
1.3.5.7.1.2 Workstation
If a remote Workstation is named here, alarms and events will be filtered on whether they originated
from that remote Workstation. This field can accept
wild-cards , and therefore if Workstations have
been named generically (ie OpRoom1, OpRoom2 etc.), the filter could apply to more than one remote
Workstation.
1.3.5.7.1.3 Alarm Text
Any text type here will be used as a filter on the Alarm Text of any alarm or event. The field can be
used with
wild-cards .
1.3.5.7.1.4 Using Wildcards
When using the Filter Property pages several filter settings allow wildcard characters to be specified.
The wildcard characters are the * (asterisk) and ? (question mark) characters.
The '*' signifies a match with zero or more characters. Note: any characters specified after an asterisk
are ignored.
The '?' signifies a match with exactly one character.
A few examples:
Wilcard Use Explanation
Digital* Matches with Digital Alarm, Digital Alarm9, Digital, etc.
Real? Matches with Real1, RealX, but does not match Real.
Analog*15 Matches with Analog Alarm386, Analog15 etc. (remember that the 15 after the
asterisk will be ignored).