Eclipse - Fujitsu Ten ECLIPSE AVN7000 - Manual (Page 32)

Woofer driver
• solid aluminum cone (SC8365: 6-1/2”)
(SC8355: 5-1/4”)
• Aluminum diecast baskets
• Santoprene surround
• Porous flat spider
• Aluminum voice coil former
• Very narrow voice coil gaps
• Vented pole piece
Midrange driver
• 1-1/2˝ solid aluminum hard dome
• Neodymium magnet
• Aluminum voice coil former
• Ferro-fluid cooled
• Flush-mounting kit
Tweeter
• 3/4˝ solid aluminum hard dome
• Neodymium magnet
• Aluminum voice coil former
• Ferro-fluid cooling
• Flush-mounting kit
Crossover
• Audiophile-grade, speaker-specific matched
component passive crossover with clear lexan cover
• 12dB/octave high-pass, 6dB/octave low-pass
Butterworth Optimum Q crossover filters
• OFC wirewound air core inductors and metallized
polypropylene capacitors
• Tweeter protection circuit
• Variable tweeter sensitivity (-3dB/0dB/+3dB)
When size limitations are not a factor for speaker
installations, ECLIPSE Component Series Speakers are an
ideal choice. These are complete two- and three-way
speaker systems with different components and crossovers
designed to synergistically work together in perfect balance
right from the start.
Component Series Speakers
SC8365
6-1/2˝ Component 3-Way Speaker System
• RMS power handling: 100W
• Max. power handling: 300W
• Sensitivity (1Watt/meter) SPL: 88dB
• Crossover frequencies: woofer/midrange 1400Hz,
midrange/tweeter 5kHz
• Mounting Depth: 2-7/8˝
SC8355
5-1/4˝ Component 3-Way Speaker System
• RMS power handling: 85W
• Max. power handling: 250W
• Sensitivity (1Watt/meter) SPL: 87dB
• Crossover frequencies: woofer/midrange 1400Hz,
midrange/tweeter 5kHz
• Mounting Depth: 2-5/8˝
Woofer driver
• Metalized Mica PP
• 8-spoke, diecast vented aluminum basket frame
• Santoprene surround
• Symmetrical Low Distortion Spider
• High porous spider material
• 1-1/4˝ voice coil
• Aluminum voice coil former
• Narrow gap coil design
• Chromed vented air-cooled pole piece
• Gold-plated input terminals
• Grills included
High Frequency Driver
• Neodymium magnet
• 1˝ aluminum hard dome tweeter cone
• Ferro-fluid cooling
• Flush and angle mounting kits included
Crossover
• Passive 2-way optimized component-specific
crossover network
• Compact, low-profile crossover with clear plexiglass
cover
• 12dB/octave hi- and low-pass Butterworth filters
• Tweeter protection circuit
• Air/iron core inductors
• ECLIPSE HQ capacitors
• Variable tweeter sensitivity (-3dB/0dB/+3dB)
• Gold-plated input/output terminals
SC8264
6-1/2˝ 2-Way Driver with 1˝ Aluminum Tweeter
• RMS power handling: 85W
• Max. power handling: 250W
• Mounting Depth: 2-7/8˝
SC8254
5-1/4˝ 2-Way Driver with 1˝ Aluminum Tweeter
• RMS power handling: 75W
• Max. power handling: 220W
• Mounting Depth: 2-3/8˝
3-Way SC-Series
2-Way SC-Series
32