Electrolux PE 9038-m fww User Manual
Page 19
8
PROGRAMMING THE AMOUNT OF COFFEE BEANS TO BE
GRINDED
•
This espresso machine has already been calibrated in factory to dispense the
ideal measure of ground coffee for one cup of espresso.
•
However this quantity of ground coffee can be increased or reduced, then the
selected measure is stored. The programmable measure of ground coffee
refers to both the espresso selection and to regular coffee selection.
•
Put the machine on stand-by mode as described.
•
Keep the start control pressed for 10 seconds.
•
Some LEDS will flash, working as indicators, (the more
the LEDS are
illuminated the greater the quantity of coffee). Before adjusting make a note
of the original setting so that the machine can be reset to the factory settings
if required.
•
To increase or decrease the quantity of ground coffee just press the
“espresso” control to decrease and “regular coffee” control to increase.
19/35