Epson EX3210 - Manual (Page 79)

To change settings for an input source, make sure the source is connected and select that source.
Setting Options Description
Auto Setup On Automatically optimizes
computer image quality (when
Off
On)
Resolution Auto Sets the input signal resolution if
not detected automatically using
Normal
the Auto option
Wide
Tracking Varying levels available Adjusts signal to eliminate
vertical stripes in computer
images
Sync. Varying levels available Adjusts signal to eliminate
fuzziness or flickering in
computer images
Position Up, down, left, right Adjusts the image location on the
screen
Progressive EX3210: Sets whether to convert
interlaced-to-progressive signals
On
for certain video image types
Off
On: for still images
EX3212/EX5210/EX7210:
Off: for fast-moving video images
Off
Video: for most video images
Video
Film/Auto: for movies, computer
Film/Auto graphics, and animation
Noise Reduction Off Reduces flickering in analog
images in two levels
(EX3212/EX5210/EX7210) NR1
NR2
HDMI Video Range Normal Sets the video range to match
the setting of the device
(EX3212/EX5210/EX7210) Expanded
connected to the HDMI input port
Auto
79