Using the projector help displays, Solving image or sound problems – Epson EX3210 User Manual
Page 105
Power light
Lamp light
Temperature
Status and solution
light
Red or flashing
Flashing red
Flashing red
Internal projector error. Turn the projector off,
red
unplug it, and contact Epson for help.
Note: If the lights display a pattern not listed in the table above, turn the projector off, unplug it, and
contact Epson for help.
Parent topic:
Related references
Projector Setup Settings - Extended Menu
Where to Get Help
Related tasks
Cleaning the Air Filter and Vents
Replacing the Air Filter
Replacing the Lamp
Using the Projector Help Displays
You can display information to help you solve common problems using the projector's Help system.
1.
Turn on the projector.
2.
Press the Help button on the projector or the remote control.
You see the Help menu.
3.
Use the up and down arrow buttons to highlight the problem you want to solve.
4.
Press Enter to view the solutions.
5.
When you are finished, do one of the following:
• To select another problem to solve, press Esc.
• To exit the help system, press Help.
Parent topic:
Solving Image or Sound Problems
Check the solutions in these sections if you have any problems with projected images or sound.
105