Lights, On/off timer knob, Ab c 3 – Electrolux TC 180 User Manual

Page 5

Advertising
background image

- 5 -

1.

Door Latch

(push the knob to the right to open)

Avoid opening the door while a program is in
progress.

2.

Space for programme chart

(Self-adhesive label)

3.

Control panel with indicator lights

• Lights

A.

Indicates the dryer is running

B.

Indicates that the water tank is full

• On/off timer knob

C.

Turn this knob in a clockwise direction to start the
dryer and set both the drying time and the drying
temperature.

High heat: The timer indicates up to 120 mins for
cotton/linen.

Low heat: The time indicates up to 80 mins for
synthetics.

The last 8 - 12 minutes of each drying cycle is a cool
down phase.

4.

Warm air discharge

5.

Adjustable feet

If the dryer is not being wall mounted the feet need
to be adjusted so that the dryer is level.

6.

Air ducts

- These should not be obstructed.

7.

Filters

Should be cleaned before or after each load.
The fluff filter is behind the coarse filter and can
be removed for cleaning.

8.

Condenser

This is built into the door and needs to be cleaned
at regular intervals.

9.

Water tank

This fills up with the water condensed by the dryer,
and should be emptied before or after each load.
When the tank is full, warning light (B) will come on
and the dryer will stop automatically. It cannot be
restarted until the tank has been emptied.

10. Drum

11. Rating plate

12. Electrical supply cable

13. Holder for wall mounting console

A

B

C

3

Advertising