Powerplus POWLI113 PORTABLE ENERGY SAVING FLOODLIGHT 2X27W EN - Manual

POWLI113 EN
Copyright © 2010 VARO P a g e | 1 www.varo.com
PORTABLE ENERGY SAVING WORK LIGHT
POWLI113
1 DOMAIN OF USAGE
Outdoor or indoor usage such as jobsite, garden, studio and workshop.
WARNING! Read this manual and general safety instructions
carefully before using the appliance, for your own safety. Your
power tool should only be passed on together with these
instructions.
2 SYMBOLS
In this manual and/or on the machine the following symbols are used:
Read the manual before using the machine
In accordance with essential applicable safety standards of European
directives
3 WARNING
 Switch off lamp before plugging into the socket.
 Never attempt to change plug or any inside electronic parts. All electronic parts
should be replaced by a professional electrician.
 When tube burns out: Replace ONLY with same specification 2H Fluorescent
bulb(B).

Never attempt to change wire connection way as this has been fixed professionally.
 Disconnect the plug (all-poles) from the network when the front PC-cover is open,
and follow the instructions to next step.

Replace PC-cover immediately before using if it is cracked.
 If the external flexible cable of this item is damaged, it should be replaced by a
professional electrician.
4 ASSEMBLING LAMP ONTO THE STAND
 First unscrew the black wing-nut (C).
 Slide the G-shaped tubular base ( D) into black metal clamp at base of the lamp.
Assemble with the wing-nut through the slot in the black metal clamp.

By loosening the wing-nut (C), you can tilt the lamp into the desired angle.
 Lock the lamp in place by tightening the wing-nut.
5 HOW TO USE THIS LIGHT
Simply plug in the cable plug (E) into the socket and enjoy bright and efficient lighting.
Do not use the light on a slant ground avoiding falling down and damaging the lamp.