Powerplus POWLI421 LED TORCH 1,5W EN - Manual (Page 2)

POWLI421 EN
Copyright © 2014 VARO P a g e | 2 www.varo.com
4 WARNINGS
 Do not shine directly into eyes.

Charge the battery on a regular basis, even when not in use. Never discharge your
battery completely. This will ensure a longer life endurance of your battery.
 Keep dry.
 DO NOT open, drop, short-circuit, incinerate, expose temperatures higher than 70°C
or change /use if damaged.
 Only use the charging adaptor provided with the work light. Use of any other adaptors
may damage the tool or result in a fire.
 Do not submerge in water or any other liquid. It is not waterproof.
 Do not operate in explosive atmospheres, such as in the presence of flammable
liquids, gases or dust.
 Do not charge the work light more than 8 hours. Overcharging will cause overheating
and shorten battery life.
 Read warnings on the package before use.
5 OPERATION
5.1 Magnetic base
The work light features a magnetic base on the bottom, allowing the light to be
magnetically attached to a vehicle or other metal objects.
NOTE Do not place the light on or near computer equipment,
computer disks or other types of magnetic storage equipment as
strong magnetic fields can erase or corrupt data.
5.2 Different modes
NOTE: Each LED flashlight is equipped with the dedicated ON/OFF
push button and can be operated independently without being
assembled with other LED flashlights.
 LED HIGH MODE: Press the ON/OFF switch, the work light will turn on. In this mode,
the work light operates as a maximum illumination. Working time in this mode is up to
1 hour on a full charge.
 LED LOW MODE: Press the ON/OFF switch one more time, the work light will turn
on with a low light mode, working time in this mode is up to 3 hours on a full charge.
 LED WARNING MODE: Press the ON/OFF switch again, the LED light will start
blinking.

Press the ON/OFF switch one more time, the light will turn off.
6 CHARGING THE BATTERY
6.1 Using the ac charging adapter

Put the light vertically into the base.
 Plug in the charger.
 The 3 charging LED indicators will glow RED while charging is in progress.

The battery will be fully charged after approximately 3-5 hours, and 3 RED charging
indicator will be turned to GREEN when the unit is fully charged.
 Disconnect the charger.