Technical data, Noise, Warranty – Powerplus POWXG2009 HEDGE TRIMMER 750W 690MM EN User Manual

Page 6: Powxg2009, 9 technical data, 10 noise, 11 warranty

Advertising
background image

POWXG2009

EN

Copyright © 2014 VARO

P a g e

| 6

www.varo.com

 Never clean or spray a machine with water .clean the motor housing only with a moist

cloth and never apply detergents or solvents! These could ruin the plastic parts of the
machine. Finally, dry the motor housing carefully.

 Store the machine with the supplied protection cover.
 Only use original accessories and spare parts.

9 TECHNICAL DATA

Type

POWXG2009

Voltage ~Frequency

220-240V ~50Hz

Power input

750 W

Blade length

690 mm

Cutting length

610 mm

Cutting capacity

24 mm

No load speed

1500 /min

10 NOISE

Noise values measured according to relevant standard. (K=3)
Acoustic pressure level LpA

87 dB(A)

Acoustic power level LwA

108 dB(A)

ATTENTION! Wear hearing protection when sound pressure is over 85 dB(A)

aw (Vibration)

4.3 m/s²

K = 1,5 m/s²

11 WARRANTY

 This product is warranted for a 3-year period effective from the date of purchase by the

first user.

 This warranty covers all material or production flaws excluding: batteries, chargers,

defective parts subject to normal wear & tear such as bearings, brushes, cables, and
plugs, or accessories such as drills, drill bits, saw blades, etc. ; damage or defects
resulting from maltreatment, accidents or alterations; nor the cost of transportation.

 Damage and/or defects resulting from inappropriate use also do not fall under the

warranty provisions.

 We also disclaim all liability for any bodily injury resulting from inappropriate use of the

tool.

 Repairs may only be carried out by an authorised customer service centre for Powerplus

tools.

 You can always obtain more information at the number 00 32 3 292 92 90.
 Any transportation costs shall always be borne by the customer, unless agreed otherwise

in writing.

 At the same time, no claim can be made on the warranty if the damage of the device is the

result of negligent maintenance or overload.

 Definitely excluded from the warranty is damage resulting from fluid permeation, excessive

dust penetration, intentional damage (on purpose or by gross carelessness), inappropriate
usage (use for purposes for which the device is not suitable), incompetent usage (e.g. not
following the instructions given in the manual), inexpert assembly, lightning strike,
erroneus net voltage. This list is not exhaustive.

 Acceptance of claims under warranty can never lead to the prolongation of the warranty

period nor commencement of a new warranty period in case of a device replacement.

 Devices or parts which are replaced under the warranty therefore remain the property of

Varo NV.

Advertising
This manual is related to the following products: