Powerplus POWXQ53300T SUPPORT STAND POWXQ5330/5335/5353 EN - Manual (Page 2)

POWXQ53300T EN
Copyright © 2014 VARO P a g i n a | 2 www.varo.com
POWXQ53300T
1 APPLICATION
This stand is designed as support for the mitre saws POWXQ5330, POWXQ5335 and
POWXQ5350.
WARNING! Read this manual and general safety instructions carefully
before using the appliance, for your own safety. Your power tool should
only be passed on together with these instructions.
2 PACKAGE CONTENT LIST
 Remove all packaging materials.
 Remove remaining packing and package inserts (if included).
 Check that the package contents are complete.
 Check the appliance, the power cord, the power plug and all accessories for transportation
damage.
 Keep the packing materials as far as possible till the end of the warranty period. Dispose it
into your local waste disposal system afterwards.
WARNING: Packaging materials are not toys! Children must not play with
plastic bags! Danger of suffocation!
1 Top table
4 Stand legs
2 Support plates
1 Middle support bar
20 Locking block 14 Hex bolt M8×45
12 Flat washers
16 Hexagon lock nut M8
2 Hexagon boltM8×70
1 Manual
If any parts are missing or damaged, please contact your dealer.
3 GENERAL POWER TOOL SAFETY WARNINGS
 Read and thoroughly understand this manual and the instruction manual of the tool you
use before performing the following.
 Before installing a tool on this stand, always switch off and unplug the tool.
 Before operating the tool, secure it to stand using bolts.
 Do not use the stand on uneven or unstable surface.
 Do not climb, sit or stand on the stand.
4 TECHNICAL DETAILS
Type POWXQ53300T
Max. height 825 mm
Table size 580mm x520mm