Brake handle, To stop engine, Auto move – Powerplus POWXQG7570 LAWNMOWER 160CC 510MM EN User Manual

Page 10

Advertising
background image

POWXQG7570

EN

Copyright © 2013 VARO

P a g e

| 10

www.varo.com

Start the engine carefully according to instructions and with feet well away
from the blade.

Do not tilt the lawn mower when starting the engine. Start the mower on a
level surface, free of high grass or obstacles.

Keep hands and feet away from the rotating parts. Do not start the engine
when standing in front of the discharge opening.

7.3

Brake handle

During operation, tightly hold the brake handle with both hands.
Note: During operation, when the brake handle is released, the engine will stop and thus
stopping the lawnmower from operating.

7.4

To stop engine

CAUTION: The blade continues to rotate for a few seconds after the engine
is shut off.

1.

Release the brake control handle to stop the engine and blade.

2.

Disconnect and ground the spark plug wire to prevent accidental starting while equipment
is unattended.

Fig 7

7.5

Auto move

Grip the Self-drive control handle, the lawnmower will move forward automatically with about
3.0km/h, release the self-drive handle, the lawnmower will stop move.

Fig 8

CAUTION: your mower is designed to cut normal residential grass of a
height no more than 250mm.

Advertising