Powerplus POW30650 DRILL/SCREWDRIVER 14.4V EN User Manual
Page 3
POW30650
EN
Copyright © 2013 VARO
P a g e
| 3
CORDLESS DRILL / SCREWDRIVER
POW30650
1 APPLICATION
The power tool is intended for driving and drilling through wood, metal, plastics and masonry.
It is not designed for commercial use.
WARNING! Read this manual and general safety instructions carefully
before using the appliance, for your own safety. Your power tool should
only be passed on together with these instructions.
2 DESCRIPTION (FIG A)
1.
ON / OFF switch
2.
Clockwise/anticlockwise action
switch
3.
High/low speed setting
4.
Torque setting ring
5.
Chuck (for drilling/driving)
6.
Battery pack
7.
Battery snapper
8.
Charger
9.
Power supply
10. LCD knob
11. LCD
3 PACKAGE CONTENT LIST
§ Remove all packing materials
§ Remove remaining packaging and transit supports (if existing)
§ Check the completeness of the packing content
§ Check the appliance, the power cord, the power plug and all accessories for transportation
damages.
§ Keep the packaging materials as far as possible till the end of the warranty period.
Dispose it into your local waste disposal system afterwards.
WARNING Packing materials are no toys! Children must not play with
plastic bags! Danger of suffocation!
1pc machine
1pc battery
1pc charger
6pcs drills
6pcs bits
1pc bit holder
1pc manual
When parts are missing or damaged, please contact your dealer.
4 SYMBOLS
The following symbols are used in this manual and/or on the machine:
Denotes risk of personal injury
or damage to the tool.
Read manual before use
In accordance with essential
safety standards of applicable
European directives
Class II - The machine is
double insulated; Earthing wire
is therefore not necessary.