Powerplus POWX323 VACUUM CLEANER WET/DRY 1200W EN - Manual (Page 7)

POWX323
EN
Copyright © 2013 VARO P a g e | 7 www.varo.com
8 OPERATION
Make sure the power cord has been fully unwound before you switch on the machine. The air
leaving the grids must not be hindered.
When using the machine in combination with an electrical tool, switch on the machine first and
then the electrical tool.
If the electrical tool has been connected to the electronic outlet (POWX323), directly switch on
the electrical equipment.
Use the universal nozzle for vacuuming up dust from large surfaces. To keep delicate
materials free from scratches, insert the brush edge into the nozzle.
Use the crevice nozzle for vacuuming up dust from narrow and confined spaces.
Use the upholstery nozzle for vacuuming up dust from furniture.
When vacuuming up liquids, make sure the nozzle is not fully submerged in the liquid to be
vacuumed up.
Clean the machine after use according to instructions and wind the power cord around the
shell.
8.1 POWX323 - Switching on and off ( FIG C)
 To switch on the machine for use without an electrical tool, set the on/off switch (1) to “I”.
 To switch on the machine for use with an electrical tool, set the on/off switch (1) to 'Auto'.

To switch the machine off, set the on/off switch (1) to “O”.
8.2 Vacuuming up coarse waste material
 Check whether the advanced filter has been fitted,
 Mount the tube (11) to the hose (9).
8.3 Vacuuming up small waste material and dust
 Check whether the advanced filter has been fitted.
 Fit a dust bag.
 Mount the tube (11) to the hose (9).
8.4 Vacuuming up dust released from an electrical tool
 Check whether the advanced filter has been fitted.
 Fit a dust bag
 Connect the hose (9) directly to the dust extraction outlet of the electrical tool.
8.5 Vacuuming up liquids
 Check whether the advanced filter has been removed.
 Make sure the inside of the tub (6) is clean and free from dust.
 Mount the tube (11) to the hose (9).
8.6 Emptying the tub
 Switch off and unplug the machine.
 Remove the motor housing (3).
 Empty the tub (6).