Powerplus POWXG7205 CULTIVATOR 196CC EN - Manual (Page 7)

POWXG7205 EN
Copyright © 2014 VARO NV P a g e | 7 www.varo.com
7.2 Step 2: attach lower handle bar to the cultivator
 Put the lower handle bar outside the
transmission cover and align the lower holes.
 Insert bolt + nut for each side in lower holes.
 Insert bolt + nut for each side in upper holes
at desired handlebar height.
A) Lock nuts
B) Height adjustment bolts
C) Height adjustment holes
D) Transmission cover
7.3 Step 3: attach top handle bar to the cultivator
Insert four fastening bolts on each side in every
hole.
Place fastening nuts on each bolt.
Tighten all nuts.
A) Fastening nuts
B) Fastening bolts
C) Even washer
– coil springwasher