Epson S70670 - Manual (Page 157)

Using the Control Panel Menu 157
Media Size Check On Choose whether the printer automatically detects (On), or does not
automatically detect (Off), the edges of the media. Try Off if the printer
displays a Media Size Error when the media is correctly loaded. Note,
however, that the printer may print beyond the edges of the media when
Off is selected. Ink used outside the edges of the media will stain the
inside of the printer. We generally recommend to operate with this
setting set to On.
Off
Media End Check On Choose whether the printer automatically detects (On) or does not
automatically detect (Off), the end of the media. Try Off if the printer
displays Media Out when the media is correctly loaded. We generally
recommend to operate with this setting set to On.
Off
Media Skew Check On When skewed media is detected, the printer will either stop printing and
display an error (On) or continue printing (Off). On is recommended in
most circumstances, as skewed media may cause the printer to jam.
Off
Head Strike Warning
2
Warning Options Off Choose whether the printer automatically detects (On) or does not
automatically detect (Off), the media lifting during printing.
If On is selected, the printer will stop when the media lifts to prevent a
head strike.
On is recommended if you will be performing other tasks and are unable
to give the printer your full attention during printing.
The printer may fail to detect the media lifting in the following instances
even when On is selected.
Off is selected for Media Size Check
The Platen Gap is set to 2.5
Transparent film media is used
The media has a high gloss
Warning Level Options On
Auto Nozzle Check
Item Parameter Explanation