Essick Air 726 000 2-speed - Manual (Page 8)

RE-ASSEMBLY
13) Replace the wick into the base water channel. See CONTROLS AND OPERATION
Section.
14) Position the top housing directly above the base. Lower it carefully onto the base
and align the base and top housing walls. The top housing should rest on the shelf
inside the base and attach firmly to the bottom housing.
15) Replace the air cleaning filter (if included). See REPLACING THE AIR CLEANING
FILTER Section.
16) Return the humidifier to its desired location.
17) Refill and replace the water bottle. (Refer to the CONTROLS & OPERATIONS
Section).
Under certain conditions, water impurities may accelerate bacteria
growth in the water bottle. We recommend using Bemis by Essick Air
Bacteria Treatment when the water bottle is filled. Follow directions on
the bacteriostat.
18) Plug the unit in and turn it on.
REPLACING EVAPORATIVE WICK AND AIR FILTER
We recommend replacing the wick at least once a season, more often in hard water
areas. When the wick appears excessively clogged with mineral deposits, discard it and
restore your humidifier's efficiency with a new wick. Model #SGL1040 is the replace-
ment evaporative water wick and model #1052 is the replacement air filter. (Call 1-800-
547-3888 to order.)
Only Bemis by Essick Air filters guarantee the certified output of your humidifier. Use of
evaporative wicks other than Bemis by Essick Air evaporative wicks will void your
warranty as well as the certification of output and may reduce the efficiency and output
of your humidifier.