Ericsson F221m - Manual (Page 28)

• To ignore the waiting call, take no action.
• To continue with the ongoing call and reject the
waiting call (give a User Busy indication tone to the
waiting call): press R0.
• To end the ongoing call and answer the waiting
call: press R1.
Note: if you hang up the telephone, you will also end
the ongoing call and the telephone will ring again so
that you can answer the waiting call as a normal call.
• To put the ongoing call on hold and answer the
waiting call: press R2. You can switch again
between both calls by pressing R2 each time.
Note: if “divert when busy” is on, the waiting call is
diverted to the number you have specified.
Conference calls (multiparty)
In a conference call, you can have a joint
conversation with up to four other people.
To create a conference call:
• If you are in conversation with call 1, put it on hold
(press R), and dial call 2.
• To join the two calls into a conference call: press
R3. Now you have a conference group of three
people (call 1, call 2 and yourself).
To add a new call (call 3):
• Put the conference group on hold (press R) and dial
call 3.
• Join the new call to the conference group: press R3.
Now you have a conference group of four people
(call 1, call 2, call 3 and yourself).
To end the conference call, hang up the telephone.
To release a specific call from the conference group:
press R1X (where X is the number of order of the
call).
To choose one call from the multiparty in order to
have a private communication, putting the rest of the
conference calls on hold: press R2X (where X is
the number of order of the call you want to
communicate with).
Explicit call transfer
To transfer a call to another B-number:
• Put the ongoing call on hold (press R) and dial the
B-number.
• Now you can connect this new call, which is
ongoing, with the call you have put on hold, but
abandon the conversation yourself. To do this, press
R4.
Advanced features 27