Electrolux LAVAMAT TURBO 12710 VIT - Manual (Page 17)

Altering an option/programme which is running
To alter an option, first set the machine to PAUSE by pressing the
START/PAUSE button.
Any option can be modified before the machine starts it. After select-
ing the new option press the START/PAUSE button again to re-start the
selected programme.
To modify the selected programme turn the programme selector dial to
RESET and then choose a new programme.
After pressing the START/PAUSE button again, the machine restarts
with the newly selected programme and the water is not emptied out.
Opening the door after the programme has started
You can open the door, after having set the machine to PAUSE, provided the
following conditions exist:
• the machine is not in the heating or drying phase beyond 55°C;
• the level of the water is not high;
• the drum is not turning.
If these requirements are met, when you pause the machine the door can be
opened.
Should it not be possible to open the door, and should it be absolutely nec-
essary to do so, switch the machine off by pressing the ON/OFF button.
After approximately 3 minutes, you can open the door.
Pay attention to the level and temperature of the water in the machine!
When you close the door and press the ON/OFF and START/PAUSE buttons
again, the washing machine will resume the programme from the point
where it had been interrupted.
17
Description of the appliance
132984531.qxd 23/08/2005 09:38 Pagina 17