Eiki LC-X2U - Manual (Page 56)

Problem: Try these Solutions:
Picture is T/B
inverted, Check Reverse T/B feature.
(See “OTHER FUNCTION SETTING” section on pages 50
Picture is L/R
Reversed. Check Reverse L/R feature.
(See “OTHER FUNCTION SETTING” section on pages 50 51).
Some displays are
not seen during the
operations Check Display feature.
(See “OTHER FUNCTION SETTING” section on pages 50 51).
No sound. • Check audio cable connection from audio input source.
• Adjust audio source.
• Press the VOLUME (+) button.
•
Press the MUTE button.
Remote control unit
doesn’t work. • Check the batteries.
• Make sure nothing is blocking between the remote control sensor and remote
control unit. S
• Make sure you are not too far from the projector when using the remote controlunit.
{Maximum operate range 16.4(5 m)}.
• Check the transmitted signal mode from the remote control unit.
(See “OTHER FUNCTION SETTING” section on pages 50 — 51).
Wireless mouse
function does not
work. • Check the cable connection between the projector-and the computer.
• Check the mouse setting on your computer. -
•
Turn on the projector before you turn on the computer.