Extron electronic MCP 1000 - Manual (Page 2)

The MKP 1000 is a remote keypad that can
work in conjunction with a MCP 1000 or
directly control a Matrix 6400 or 3200 Series
Switcher from a remote location or room.
Each keypad can be programmed to control
the switching of certain inputs from a matrix
switching system to a specific output associated
with that keypad. The keypad can be used to
select different inputs, check the last selected
input, or activate presets.
The MKP 1000 can be configured for the
following modes: room preset mode (select from 10 possible room presets), output
mode (tie any input to a dedicated output), and global preset mode (select from 32
global presets). For easy wiring and set-up, Extron’s Comm-Link cable provides
communications and power from a Matrix 3200/6400 switcher or MCP 1000. The
MKP 1000 is mounted in a standard electrical wall box with a two-gang wall plate,
which may be installed in a wall, conference table, or podium.
■ Compatibility – For the Matrix 3200/6400 Series Switchers, the MKP 1000
works either independently or in conjunction with the MCP 1000. The MKP
1000 works in conjunction with the MCP 1000 for Extron SW MX, System,
and Matrix Switchers.
■ Modes – The MKP 1000 operates in three modes: room preset mode (choose
from 10 possible room presets), output mode (tie one specific input to a
dedicated output), and global preset mode (choose from 32 global presets).
■ Enclosure –The MKP 1000 is mounted in a standard electrical wall box with a
two-gang wall plate.
■ Power supply – The MKP 1000 draws power from a Matrix 3200/6400
switcher or a MCP 1000.
MKP 1000 (Grey) .......................................... 60-239-01
MKP 1000 (Black).......................................... 60-239-02
MKP 1000 (White) ........................................ 60-239-03
EXTRON ELECTRONICS/RGB SYSTEMS, INC.
1230 South Lewis Street, Anaheim, CA 92805
800.633.9876 714.491.1500 FAX 714.491.1517
U.S.A. EXTRON ELECTRONICS, EUROPE
Beeldschermweg 6C, 3821 AH Amersfoort
+31.33.453.4040 FAX +31.33.453.4050
The Netherlands EXTRON ELECTRONICS, ASIA
41B Kreta Ayer Road, Singapore 089003
+65.226.0015 FAX +65.226.0019
Singapore EXTRON ELECTRONIC INFORMATION
E
XTRON WEB™: www.extron.com
E XTRON FAX™: 714.491.0192
24-hour access—worldwide!
99-08
68-451-01
REV. B
MCP 1000
MENU NEXT
VIEW ENTER 0
1 2 3
4 5 6
7 8 9
VIEW ENTER 0
1 2 3
4 5 6
7 8 9
Controls a Matrix 6400
or 3200 Series Switcher,
or works with a MCP 1000
MATRIX SWITCHER
MKP 1000
Up to 64 MKP 1000's
MCP 1000
MATRIX 6400 WIDEBAND VIDEO
POWER SUPPLIES COMMUNICATIONS PRIMARY
RGB MUTE
AUDIO MUTE
TX RS232 BME REMOTE SYSTEM STATUS REDUNDANT RX DIAGNOSTICS
+V -V
FPC-1000
MCP 1000 A
PPLICATIONS
F
EATURES
P
ART
N
UMBERS
The MCP 1000 is a remote control panel that controls any Extron SW MX,
System, or Matrix Switcher. The MCP 1000 provides a user with remote control
capabilities for an Extron product with an RS-232 Simple Instruction Set™ (SIS)
port or Comm-Link communications port. The MCP 1000 features three modes
of remote control operation: one-button switching for a particular output, global
presets, and room presets (available with Matrix 3200/6400 Switchers only).
The MCP 1000 is available as a Master (M) with RS-232 capabilities or Slave (S)
with no RS-232 capabilities. Both units provide MKP 1000/Comm-Link remote
communication ports for Comm-Link communications to the Matrix 3200/6400
Series. The MCP 1000M unit offers an RS-232 port for communication with any
Extron SIS-compatible switcher. An RS-232 loop-thru port allows for third-party
control of the switcher when the MCP 1000M is connected by RS-232. The MCP
1000S can communicate via Extron’s Comm-Link protocol to any MCP 1000 or
Matrix with Comm-Link ports.
■ Compatibility – The MCP 1000 works with Extron SW MX, System, and
Matrix Switchers and is compatible with up to 64 MCP 1000 and MKP 1000
units.
■ Modes –The MCP 1000 operates in these modes of operation: one-button
switching for a particular output, global presets, and room presets (Matrix
3200/6400 only).
■ Front panel buttons – The MCP 1000 features large positive-touch illuminated
pushbuttons which can be labeled with text or graphics.
■ Enclosure – The rack-mountable MCP 1000 comes in a compact, 1U enclosure
with a 5" depth.
■ Mounting options – The MCP 1000 offers mounting brackets suitable for
three options: a standard 19" rack, mounting under a desk, or mounting
through a desk.
■ Power supply – The MCP 1000 includes a 100-240VAC, 50/60 Hz, internal
power supply.
MCP 1000M (Master).................................... 60-298-01
MCP 1000S (Slave) ........................................ 60-298-02
Red Buttons (8) .............................................. 70-111-01
Green Buttons (8) .......................................... 70-111-02
Yellow Buttons (8) .......................................... 70-111-03
Blue Buttons (8) ............................................ 70-111-04
Assorted Buttons (8) ...................................... 70-111-05
Under the Desk Mounting kit ........................ 70-077-01
MKP 1000 A
PPLICATIONS
APPLICATION DIAGRAM
APPLICATION DIAGRAM
P
ART
N
UMBERS
F
EATURES
MCP 1000
MENU NEXT
MCP 1000
Matrix 3200/6400
System 8 Plus
System 10 Plus
Crosspoints
MAV Matrixes
Future Products
Matrix & Switchers