Overview – Emulex 110 User Manual
Page 5
NetWin 110 HBA User’s Guide
Page v
Overview
The Emulex® NetWin 110 host bus adapter (HBA) offers highly integrated 2Gb/s Fibre Channel to PCI/PCI-X
connectivity solutions for entry-level storage area networks (SANs) commonly found in small- and medium-sized
business (SMB) IT environments. The NetWin 110 HBA delivers SMB-optimized performance and features through
the use of Emulex’s industry-leading Fibre Channel controller. The NetWin 110 HBA is a single-channel HBA in a
low-profile PCI card form-factor that adapts to either standard height or low-profile server slots.
The Emulex AutoPilot Manager™ utility software provides a simple configuration and management tool for the
NetWin 110 HBA tailored specifically for SMB system administrators who are unfamiliar with detailed SAN
terminology and don’t require the multitude of settings that are required in large enterprise installations. Users can
easily monitor and perform any necessary maintenance on NetWin 110 HBAs by clicking the AutoPilot Manager
icon, which is installed automatically during the HBA installation.
This document provides the following information:
•
Chapter 1: Using the AutoPilot Manager Utility
•
Chapter 2: Updating Drivers
•
Chapter 3: BIOS Utility Configuration Guide
•
Chapter 4: Configuring an Installed Drive as a Boot Device
•
Chapter 5: Installing Windows on a New Boot Device
•
Chapter 6: Using a Microsoft Cluster Server
•
Appendix A: Installing the Low-Profile Bracket
•
Appendix B: Hardware Reference
•
Appendix C: Troubleshooting
Note:
Illustrations in this guide are examples only. Depending on your operating system, the screens you
see on your monitor may not be identical.