Indicators and projector condition, Projector condition, Indicators – Eiki LC-X71L User Manual

Page 55: Appendix

Advertising
background image

55

APPENDIX

NOTE: Specifications are subject to change without notice.

ON-SCREEN

DISPLAY

RESOLUTION

H-Freq.

(kHz)

V-Freq.

(Hz)

D-VGA

640 x 480

31.47

59.94

D-480p

720 x 480

(Progressive)

31.47

59.88

D-575p

768 x 575

(Progressive)

31.25

50.00

D-SVGA

800 x 600

37.879

60.32

D-XGA

1024 x 768

43.363

60.00

ON-SCREEN

DISPLAY

RESOLUTION

H-Freq.

(kHz)

V-Freq.

(Hz)

D-WXGA1

1366 x 768

48.36

60.00

D-WXGA5

1368 x 768

46.50

50.00

D-1035i

1920 x 1035

(Interlace)

33.75

60.00

D-1080i

1920 x 1080

(Interlace)

33.75

60.00

D-1080i

1920 x 1080

(Interlace)

28.125

50.00

D-WXGA2

1360 x 768

47.70

60.00

D-WXGA3

1376 x 768

48.36

60.00

D-720p

1280 x 720

(Progressive)

37.50

50.00

D-720p

1280 x 720

(Progressive)

45.00

60.00

D-SXGA1

1280 x 1024

63.98

60.02

D-SXGA2

1280 x 1024

60.276

58.069

When a input signal is digital from DVI terminal, refer to the chart below.

D-1080psf/30

1920 x 1080

33.75

60.00

D-1080psf/25

1920 x 1080

28.125

50.00

D-1080psf/24

1920 x 1080

27.00

48.00

D-SXGA+ 1

1400 x 1050

63.97

60.19

INDICATORS AND PROJECTOR CONDITION

Check the indicators for projector condition.

• • • on

• • • dim

• • • off

• • • blinking

The projector is OFF. (The AC power cord is unplugged.)

The projector is ready to be turned on with the POWER ON-
OFF button.

The Warning Temp. indicator blinks red to let you know the
internal temperature of the projector exceeds a normal level. If
the temperature goes up further, the projector will be turned
off automatically and the Ready indicator goes out. When the
projector is cooled down enough and the temperature returns
to normal, the READY indicator lights green and the projector
can be turned on again. (The WARNING TEMP. indicator
keeps blinking.) Check and clean the air filters.

Projector Condition

The projector is operating normally.

The projector is cooled down enough and the temperature
returns to normal. When turning on the projector, the
WARNING TEMP. indicator stops blinking. Check and clean
the air filters.

LAMP

REPLACE

yellow

Indicators

READY

green

LAMP

red

WARNING

TEMP.

red

Depending on the condition of signals and the type and length of cables, these signals may not be properly viewed.


Advertising
This manual is related to the following products: