Epson Express Station - Manual (Page 24)

Your computer’s SETUP program is stored in the system BIOS
ROM. You can run SETUP whenever you turn on or reset the
computer, regardless of whether you have installed an
operating system. See Chapter 1 of the Software Guide for
instructions on running the program.
The System Configuration utility is on the Reference diskette.
See Chapter 2 of the Software Guide for instructions on running
this utility.
Installing Your Operating System and Software
Once you have configured your computer with one of the
configuration programs, you can install your operating system
and any application programs you want to use. Your computer
must have an operating system before it can run any software
applications. See the manuals that came with your operating
system and software applications for instructions on installing
and using them.
If you’ll be using the built-in SCSI or LAN controllers, or your
built-in VGA display adapter with extended VGA resolutions,
you may need to install device drivers to support certain
capabilities. See Chapters 5, 6, and 7 of the Software Guide for
more information.
Setup Guide 15