Elta 5788 - Manual (Page 9)

9.
Various Playing Modes
Press the MODE button (2) to cycle through the replay modes:
NORMAL 1 ALL INT RND NORMAL.
A. Repeat Play
During PLAY mode
• Press the MODE button once to play the current track repeatedly.
• The repeat indicator 1 will appear in the display.
During PLAY mode
• Press the MODE button twice to play the entire disc repeatedly.
• The repeat indicator ALL will appear in the display.
NOTE:To cancel REPEAT press the MODE button until the repeat indicator disappears.
B. Intro Scan
In STOP mode
• Press the MODE button three times.
• The INT indicator will appear in the display.
• Press the PLAY button to play the first 10 seconds of each track on the disc.
NOTE:To cancel INT SCAN press the MODE button until the INT indicator disappears.
C. Random Play
In STOP mode
• Press the MODE button four times.
• The RND indicator will appear in the display.
• Press the PLAY button, all the tracks on a disc will be played in random sequence.
NOTE: To cancel RANDOM PLAY press the MODE button until the RND indicator disappears.
Program Play
1. In stop mode, press the PROG button (5) to create your own playlist.
2. “ PGM 00 01” will be displayed, “00” stands for the track number, “01” stands for the position on the playlist.
* “PGM 00 ” is flashing.
3. Press or button to select the desired track.
4. Press the PROG button again to enter the track into memory. The program number is increased by one.
* The program number “01” changes to “02”.
5. Repeat steps 3 and 4 to program the order of up to 20 tracks.
6. Press to start program replay.
7. To stop the function, press the STOP button once.
8. To resume playing in the programmed sequence press PROG and buttons.
9. To check the PROG memory press or in PROG play mode.
10. To erase the program memory OPEN the disc drive or turn off the power.
DIGITAL ANTI-SHOCK PROTECTION
The digital ANTI-SHOCK PROTECTION uses semiconductor memory to prevent the player from skipping when
the unit is subjected to shocks and vibration during play.
When the PLAY/PAUSE button is pressed and the power turns on, the digital Anti-Shock Protection turns on
automatically.
The display “ASP” will flash and the function is initialized, when “ASP” stops flashing, the data buffer is full.
It will give approximately 60 seconds protection against skipping. If the player is subjected to shocks for more
than 60 seconds, some skipping will occur; this is normal and to be expected, the sound will resume once the
player has stabilized from the shock.
LOW BATTERY INDICATION
When the low battery indicator appears in the display the batteries must be replaced.
Always replace both batteries, do not mix old and new batteries or batteries of different types.